Taborsky dome

The Taborsky dome for raised corrugation mounting which we offer is a further development of the conventional attachment in the trough.

This provides several advantages:

• The tension which occurs in Taborsky trapezoidal sheets is better absorbed with the longer attachment screws.
• Furthermore, there are no openings at any point where the largest volume of roof water is drained.
• Faults which can occur during installation are significantly reduced with this type of attachment.
• The seal on the dome and on the screw is a secure guarantee of absolute leak tightness with proper use.

Excerpt from DIN 18338

´Profiled sheets should be attached to a timber structure and a steel structure with corrosion-protected screws. The attachments must be on the top curve of the corrugation, they must be protected against moisture penetration.´

Our domes with EPDM seal in conjunction with our facade construction screws, approved by the building authorities, are the perfect solution to this problem.

Domes are available for the profiles: TR 20/125, TR 35/207, TR 37/200, TR 40/183, TR 45/333 and TR 50/250.