Taborsky façades, general information
Structure of the VHF system
Taborsky façade profiles are specially developed for use as mounted, rear-ventilated façades.
The structure of a classic mounted, rear-ventilated façade consists of the substructure, the façade insulation, the rear-ventilation gap and the façade cladding.
Technical specifications for façade profiles
All of our façade profiles are supplied as a self-supporting wall cladding element with a CE mark according to EN 14782. The tolerances of the profiles are regulated according to EN 508, but considerable importance is attributed to the dimensional accuracy during the manufacturing. This dimensional accuracy is monitored by our in-house production control.
Façade profiles from Taborsky are cut to the required lengths between 300 mm and 6000 mm. In this way, the profiles are customised to fit a building. The profile configuration specifies a specific overall width. For flawless building closures, however, matching profiles can also be manufactured in different widths.
Attachment, finishing
Stainless steel thread-form fasteners are recommended for the attachment of Taborsky façade profiles. Due to the temperature-related expansion of the profiles, special care must be taken to ensure that the attachment is free from constraints. This form of attachment enables the profiles to be replaced quickly in the event of damage.
If profiles have to be cut, only suitable tools and machines may be used. Flying sparks and high heat generation should be avoided at all times.
Static dimensioning
In contrast to our standard trapezoidal and corrugated profiles, due to the wide variety of profiles, different materials and sheet thicknesses, there is no static pre-dimensioning or load tables for Taborsky façade profiles. Project-specific static proof can be provided.